XFLY SWIFT 2100 GLIDER W/O TX/RX/BATT XFly Model is proud to announce their first RC glider Swift 2100 that is easy to hand launch, quick to build and fun to fly! CFD(Computational Fluid Dynamics) was first used in the aircraft design by XFly team, which has enabled the Swift 2100 to achieve high lift-to-drag ratio and excellent aerodynamic characteristics. The Swift 2100 features tough, composite-reinforced EPO foam and precisely positioned carbon fibre reinforcement through out. The factory-installed power system, including an efficient 3136-KV1000 brushless motor and a 40A brushless ESC, paired with a 3S or 4S Lipo battery, delivers plenty of thrust for fast climbs to soaring altitude, sport flying and aerobatics. The Swift 2100’s efficient aerodynamic design provides extended flight times up to 10-30mins with a mix of power on/off. The bottom wheel and plastic components on the wingtips and the tail allow the pilots to land on hard surface. Wing connectors and glueless design facilitate fast and easy assembly – only 6 screws needed to get the Swift 2100 ready to fly. In addition, pilots can remove the folding propeller and add the optional nacelle(with XFly Galaxy 50mm EDF 4S power system installed) to the top of the fuselage for a different flying experience. FPV setup is also feasible with the optional canopy and servo-equipped camera mount available from XFly Model! FEATURES Efficient folding propeller, metal spinner and functional flaps Carbon fibre reinforcement throughout High-power brushless power system compatible with 3S or 4S Lipo batteries Efficient aerodynamic design for extended flight times up to 10-30mins Fast and easy assembly – no glue required and only 6 screws needed Optional nacelle for EDF setup Optional canopy and servo-equipped camera mount for FPV setup SPECIFICATIONS Wingspan: 2100mm/82.7in Overall Length: 1050mm/41.3in Flying Weight: 1350g Motor Size: 3136-KV1000 motor ESC: 40A Servo: 9g servos*6 Radio: 6 channel CG: 50mm from the leading edge Wing Load: 38.5g/dm² Wing Area: 35dm² Recommended Battery: 3S/4S 2200-2600mAh Approx flying Duration: 10-30 mins Assembly Time: 10 mins Skill Level: Beginner Age Level: 14 years Flap: Yes LED: No Retract: No Landing Gear: No Prop Size: 10″x6″ REQUIRED TO COMPLETE 6 channel radio system Battery (recommended 3S/4S 2200-2600mAh
