iFlight Borg 5S 60A Stack (20×20) This is iFlight Borg 5S 60R stack, designed to mount the frame with a 20x20mm mounting pattern. The Borg 5S RX FC Flight Controller is specifically designed for racing fpv, providing unmatched performance. This innovative controller features a built-in ELRS 2.4GHz receiver and an integrated antenna, ensuring a reliable connection and enhanced control during your flights. Additionally, the Borg 5S RX FC offers the flexibility to support external receivers, allowing you to customize your setup to meet your individual racing needs. Elevate your racing experience with the cutting-edge technology of the Borg Series! Building Note: The ESC in this stack has 20 x 20mm mounting holes, but the ESC is larger then our regular, 20x20mm esc’s, The ECS’s outer dimensions are 45*52mm. Product Highlight’s Built-in ELRS 2.4GHz Receiver, while also being compatible with external antennas for enhanced flexibility. Supports 3S to 8S battery inputs, offering versatility for various racing setups. Integrated 12V BEC provides stable power for your VTX system and allows remote control to switch it on and off. FPC cables ensure secure connections with ESCs, while SH1.0 connectors enhance reliability across all other interfaces. Product Information FC Information Name: Borg 5S RX FC Input voltage: 4-8S; Support LIHV battery MCU: AT32F435RGT7 Gyro: ICM42688 Barometer: N/A OSD Chip: AT7456E Flash: 16MB (Blackbox flash) UARTS: 4 Motor outputs: 4 I2C serial: Non support VTX protocol: support DJI MSP/Smartaudio/IRCTramp/HDZero LED controller: Yes Beeper pad: Yes Firmware target: IFLIGHT_BLITZ_ATF435(Betaflight) Mount pattern: 20x20mm Dimensions: 34*28.5mm±1 Weight: 6.8g±1 BEC: 5V 2.5A, 12V 2A (12V with VTX switch) ESC Information Product Name: Borg 60R ESC Input Voltage: 3-8S; Support LIHV battery Max. Continuous Current: 60A Max. Burst Current: 65A (10s) MCU: STM32G071N Driver: FD6288 Firmware: BL32 (32bit ESC) Target: IFLIGHT_BLITZ_G3 32.9 Current Sensor: No BEC: No Telemetry: Supported Bidirectional DSHOT: Supported Dimensions: 45*52mm±1 Mounting Holes: 20 x20 mm/Φ4mm Weight: 14.5g±1 Protocol: Supports DShot150/300/600、MultiShot、OneShot etc. UART Setup Suggestion UART 1 for VTX HD / Analog UART 2 for ESC Telemet UART 4 for Built-in ELRS receiver/SBUS input UART 5 for GPS or other sensors that require a serial port In the box 1 x iFlight Borg 5S RX Flight Controller 1 x iFlight Borg 60R ESC 1 x Various Cables 5 x Silicon gummies
